- Supports 10th Gen Intel® Core™ Processors and 11th Gen Intel® Core™ Processors*
- Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
- Intel® Optane™ Memory Ready
- Direct 11+1 Phases Digital VRM Solution with Low RDS(on) MOSFETs
- Enlarged VRM Heatsink with Increased Surface Contact Air-Flow Grooving
- GIGABYTE Exclusive 8118 Gaming LAN with Bandwidth Management
- Multi-Way Graphics Support with PCIe Armor and Ultra Durable™ Design
- Dual Ultra-Fast M.2 with PCIe Gen3 X4 & One Supports SATA Protocol
- Intel® Native USB 3.2 Gen2 Type-A with Speed Up To 10Gbps
- RGB FUSION 2.0 Support Addressable LED & RGB LED Strips
- Smart Fan 5 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP
- Q-Flash Plus Updates BIOS without Installing the CPU, Memory and Graphics Card
- Rear IO Armor with Pre-Installed I/O Shield
- CEC 2019 Ready, Save the Power as Easy as One Click
- Lightning-Fast Intel® Thunderbolt™ 3 AIC Support
- * Updated BIOS is required for compatibility
Gigabyte Z490 UD AC
Brand
Gigabyte
Manufacturer
Gigabyte
Model
Z490 UD AC
CPU
Support for 10th Generation
Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors
/Intel® Celeron® processors in the LGA1200 package.
L3 cache varies with CPU.
(Please refer to "CPU Support List" for more information.)
Chipset
Intel® Z490 Express Chipset
Form factor
ATX Form Factor; 30.5cm x 24.4cm
Memory
Intel® Core™ i9/i7 processors:Support for DDR4
4500(O.C.)/4400(O.C.)/4300(O.C.)/4266(O.C.)/4133(O.C.)/4000(O.C.)/3866
(O.C.) /3800(O.C.) /3733(O.C.)/ 3666(O.C.)/3600(O.C.)/ 3466(O.C.)
/3400(O.C.)/3333(O.C.)/3300(O.C.)/3200(O.C.)/3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules
Intel® Core™ i5/i3/Pentium®/Celeron® processors:Support for DDR4 2666/2400/2133 MHz memory modules
4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
Dual channel memory architecture
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
(Please refer to "Memory Support List" for more information.)
Audio
Realtek® ALC887 codec,High Definition Audio,2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first.Please visit GIGABYTE's website for details on configuring the audio software
Support for S/PDIF Out
LAN
Realtek® GbE LAN chip (1000 Mbit/100 Mbit)
Wireless Communication module
Intel® Wi-Fi AC 9462:
Intel® CNVi interface 802.11a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
BLUETOOTH 5
Support for 1x1 11ac wireless standard and up to 433 Mbps data rate
* Actual data rate may vary depending on environment and equipment.Expansion Slots
1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)Supports up to ASPM L1.2 power management protocols.
Storage Interface
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) (M2A_SB)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD support) (M2M_SB)
6 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.Intel® Optane™ Memory Ready
M.2 connectors support up to ASPM L1.2 PCIe power management protocols.
USB
1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
7 x USB 3.2 Gen 1 ports (5 ports on the back panel, 2 ports available through the internal USB header)
4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Internal I/O Connectors
1 x 24-pin ATX main power connector,1 x 4-pin ATX 12V power connector,1 x 8-pin ATX 12V power connector,1 x CPU fan header,4 x system fan headers,2 x addressable LED strip headers,2 x RGB LED strip headers,1 x Q-Flash Plus button,6 x SATA 6Gb/s connectors,2 x M.2 Socket 3 connectors,1 x front panel header,1 x front panel audio header,1 x S/PDIF Out header,1 x USB 3.2 Gen 1 header,1 x USB 2.0/1.1 header,1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only),2 x Thunderbolt™ add-in card connectors,1 x serial port header,1 x Clear CMOS jumper
Back Panel Connectors
1 x PS/2 keyboard/mouse port,2 x SMA antenna connectors (1T1R),1 x HDMI port,1 x USB 3.2 Gen 2 Type-A port (red),5 x USB 3.2 Gen 1 ports,2 x USB 2.0/1.1 ports,1 x RJ-45 port,3 x audio jacks
H/W Monitoring
Voltage detection,Temperature detection,Fan speed detection,
Overheating warning,Fan fail warning,Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.BIOS
1 x 256 Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0